Automatic Table Tennis Machine for Training with 40mm+ Table Tennis Balls

About this item

• Ensure there are at least 20 balls below the feeding tube for proper functioning of Suz S201. If the machine is not serving correctly, check for sufficient balls around the feeding tube and set the ball frequency on the control box to at least 1.
• Verify the presence of enough balls around the feeding tube. Slightly tighten the net and adjust the tilt to encourage the balls to reach the feeding tube.
• To adjust the robot head up and down, refer to our video instructions. For direct serve (single bounce on the table), set topspin to 6 and backspin to 2 or 3 on the control box. For indirect serve (double bounce on the table), set topspin to 4 and backspin to 3 on the control box.
• Refer to the manual for installation instructions. Insert the power cord behind the control box (not the back of the machine).
• The robot can only be placed on table tennis tables less than 2.5 inches thick. Tables thicker than 2.5 inches are not suitable for our robot.
• The manufacturer offers replacement parts for any damage caused by normal wear and tear within one year of purchasing Suz table tennis robots. Contact the manufacturer via email for any assistance. The manufacturer's email address can be found in the manual.
• If the robot will not be used for an extended period, clean it up and store it in a box or bag to prevent dust accumulation.